Acura Integra Typer

Thanks for visiting our site!
Acura Integra Typer
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Here are some more information for Acura Integra Typer:

A Honda Civic and Acura Integra hood is required to cool the engine and the air intake from the outside elements. If you have no hood then you will get a ticket. So a hood is a necessary part of your Nissan 350Z or your Honda Civic 92-95 because it functions both as a protector of your engine and a cooling piece. A hood is a necessity, but if properly selected it can improve the cooling function of your Toyota MR2 SW20.

This is a popular composite amongst racing enthusiasts, you've probably need carbon used throughout the formula one circuit. Practically in all forms of motor sports. Even the European BMW E36, E46 make use of this revolutionary material. An exceptional addition to your Honda Civic or your Nissan Silvia S14.

Popular parts

• Vis Racing hoods
• Seibon hoods

Manufacturers like SEIBON keep various parts of the Acura Integra as light as is possible. A heavy Nissan 350Z Z33 will require more power and energy to manuver. This will add to your gas expense. SEIBON Carbon fiber light weight and SEIBON dry carbon fiber is even lighter. It is therefore SEIBON's choice of composites is perfectly suitable for use in the manufacturing of hoods, fenders, trunks, hatches and spoilers.

A carbon trunknot only reduces the weight of Mitsubishi Eclipse, it reduces it weight where it matters most. Reducing weight on the front wheels is critical because it improves the balance while driving your Mazda RX8. The front wheels are weighted down from your engine which is located under your SEIBON CF hood in most cases.

Not only are SEIBON hoods light weight but carbon fiber is also durable. You're going to open and close your bonnet many times, in doing so you want it to be be durable.

What cars can you buy these hoods and trunks for?

• Acura Integra
• Audi A4
• Honda Civic
• Honda CRX
• Mitsubishi Eclispe
• Mitsubishi Evolution EVO8
• Volkswagen Golf

CF is also pretty heat resistant, this is good news for Mitsubishi Evolution owners who run turboed engines, or SR20DET owners. Strategically placed vents duct cool air into the proper areas to cool the engine. Cooler engines mean lower gas bills and better performance.

A carbon hood can be used to personalize your Honda Civic to your liking, there are many choices from OEM to vented, some more aggressive than others. For a more extreme look you can match your carbon fiber hood with carbon fiber fenders and even a trunk or a cf body kit. VIS Racing, SEIBON, AIT they all make great carbon fiber hoods. Visit http://www.carbonfiberhoods.com and browse our vented hoods for the Honda Civic, Acura Integra even the Mitsubishi Eclipse.

A cf hoods is a perfect addition to your precision instrument!

John Rory has been in the car after-market products industry for 5 years. He specializes in body kits, carbon fiber hoods, Toyota MR2 carbon fiber engine cover and Honda Civic carbon fiber hoods in vented and OEM styles. You can learn more about a carbon fiber hood at his site http://www.carbonfiberhoods.com which thoroughly covers the various types of aftermarket auto parts available for cars and trucks.

Honda B Engine

B16

JDM B16A (First Generation)

The first VTEC engine Note: All JDM B16A engines are stamped 'B16A' (with no number after the "A" to identify version).

VTEC

Found in:

1988-1991 JDM Honda Integra RSi/XSi (DA6/DA8)

1989-1990 JDM Honda CRX SiR (EF8)

1989-1990 JDM Honda Civic SiR (EF9)

Displacement: 1,595 cc (97.3 cu in) 1.6 liter

Compression: 10.2:1

Bore: 81.0 mm (3.2 in)

Stroke: 77.4mm

Rod Length: 134mm

Rod/stroke ratio: 1.745

Power: 160ps (118 kW) @ 7,600rpm & 15.5kgm (152 Nm) @ 7,000rpm

Redline: 8100 RPM

Transmission: S1/J1/YS1 (4.4 final drive), Y1 (4.266 final drive, cable clutch, optional LSD)

ECU code: PR3-003 (DA6/DA8), PW0-000 (EF8/EF9/DA6)

ODB0

JDM B16A (Second Generation)

Found in:

1991-1994 JDM Honda Civic Sir/SiRII (EG6)

1991-1993 JDM Honda Civic Ferio SiR (EG9)

1992-1995 JDM Honda CRX Delsol SiR (EG2)

1995-1998 JDM Honda Civic Sir/SiRII (EK4)

1995-1998 JDM Honda Civic Ferio Si (EK4)

Displacement: 1,595 cc (97.3 cu in) 1.6 liter

Compression: 10.4:1

Bore: 81.0 mm (3.2 in)

Stroke: 77.4mm

Rod Length: 134mm

Rod/stroke ratio: 1.745

Power: MT: 170ps (118.kW) @ 7,800rpm & 16.0kgm (156.91 Nm) @ 7,300rpm (AT: 160ps (114.0 kW) @ 7,300rpm & 15.6kgm (152.98 Nm) @ 6,500rpm)

Redline: 8200 RPM (AT: 7700 RPM)

Transmission: S4C/Y21/S21 (4.4 final drive, optional LSD)

ECU code: P28 (EG2), P30 (EG2/EG6)

ODB1/ODB2

B16B (Type R)

VTEC

Found in:

1997-2000 JDM Civic Type R[EK9]

Displacement: 1,595 cc (97.3 cu in)

Compression: 10.8:1

Bore: 81 mm (3.2 in)

Stroke: 77.4 mm

Rod/Stroke ratio: 1.84:1

Rod Length: 142.42 mm (5.607 in)

Power: 136 kW (185 PS) @ 8200 rpm & 16.3kgm (118 ft/lbs) @ 7500 rpm

Redline: 8400 rpm

Rev-limit: 9000 rpm

Transmission: S4C With Helical LSD (4.1 final drive, dual-synchromesh on 2nd, 3rd and 4th gears)

Vtec engagement @ 5800 rpm

ECU code: PCT

Note: This engine uses the same block as the Integra Type R (B18CR), which is taller than the B16a block (by approx 17mm), but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16.

B16A1

VTEC

Found in:

Early Integra, CRX, Civic'1.6i-VT'(EE8)(EE9)

Displacement: Template:Convert/aa 1.6 liter (1595)

BoreStroke: 81.077.4 mm (3.193.05 in)

Compression: 10.2:1

Power: 150 hp (111 kW) @ 7600 rpm

Torque: 106 ftlb @ 7100 rpm

Redline: 8000 rpm

Transmission: Y2

aluminium casting

B16A2

VTEC

Found in:

1992-2000 Honda Civic EDM VTi (EG6/EG9 & EK4)

1992-1997 Honda Civic Del Sol EDM VTi (EG)

1996-1997 Honda Civic Del Sol USDM "VTEC"

1999-2000 Honda Civic USDM Si (EM1)

1999-2000 Honda Civic CAN SiR (EM1)

Displacement: 1,595 cc (97.3 cu in)

BoreStroke: 81.077.4 mm (3.193.05 in)

Compression: 10.2:1

Power: 170  hp @ 7600 rpm & 118 ftlbf (151 Nm) @ 7000 rpm

Transmission: Y21 or S4C

Redline...8500,000 RPM

Rev Limit...8,450 RPM

VTEC Engagement...5,500 RPM

aluminium casting

B16A3

VTEC

Found in:

1994-1995 Del Sol VTEC

Displacement 1,595 cc (97.3 cu in)

Power: 160 hp @ 7,600 rpm & 118 ftlbf (160 Nm) @ 7,500 rpm

Redline: 8,200 RPM

Transmission: Y21

B16A4

VTEC

Found in:

1996-2000 Civic Si-RII (JDM version) (EK4)

Displacement: 1,595 cc (97.3 cu in)

Compression: 10.4:1

Power: 125.04 kW (170 PS; 168 bhp) @ 7800 rpm & 111 ftlbf (150 Nm) @ 7300 rpm

Redline: 8200 rpm

Transmission: Y21

Note: Only offered with SiRs with manual tranmissions.

B16A5

VTEC

Found in:

1996-2000 Civic Si-RII (JDM version) (EK4)

Displacement: 1,595 cc (97.3 cu in)

Compression: 10.4:1

Power: 130 kW (177 PS; 174 bhp) @ 7800 rpm & 111 ftlbf (150 Nm) @ 7300 rpm

Redline: 8000 rpm

Transmission: Y21

Note: Only offered with SiRs with automatic transmissions.

B16A6

VTEC

Found in:

1996-2000 Honda Civic - South Africa VTEC (EK)

Displacement: 1,595 cc (97.3 cu in)

Compression: 10.2:1

Power: 118 kW (160 PS; 158 bhp)

B17

B17A1

VTEC

Found in:

1992-1993 Integra GS-R (DB25)

Displacement: 1,678 cc (102.4 cu in)

Bore: 81 mm (3.189 in)

Stroke: 81.4 mm (3.205 in)

Rod/Stroke Ratio: 1.63

Rod Length: 132.28 mm (5.208 in)

Compression: 9.7:1

Power: 160 hp (120 kW) @ 7600 rpm & 118 ftlbf (159 Nm) @ 7000 rpm

Came equipped with the YS1 cable trans, which was different than other cable B-series transmissions as it has a different input shaft.

B18

B18A

The B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 See Honda B20A engine.

Non-VTEC

Found in:

1986-1989 Accord Aerodeck LXR-S/LX-S (Japan)

1986-1989 Accord EXL-S/EX-S (Japan)

1986-1989 Vigor MXL-S (Japan)

Displacement: 1,834 cc (111.9 cu in)

Compression: 9.4:1

Bore: 81 mm (3.2 in)

Stroke: 89 mm (3.5 in)

Dual Keihin Carbs

Power: 100 hp (97 kW) @ 6100 rpm & 128 ftlbf (164 Nm) @ 4700 rpm

Transmission: A2N5, E2N5

B18A1

NON -VTEC

Found in:

1990-1993 Acura Integra usdm "RS/LS/GS" (DA9, DB1)

Displacement: 1,834 cc (111.9 cu in)

Compression: 9.2:1

Bore: 81 mm (3.2 in)

Stroke: 89 mm (3.5 in)

Rod Length: 137.01 mm (5.394")

Rod/Stroke Ratio: 1.54

Redline: 6500 rpm

Rev Limiter: 7200

Programmed fuel injection

Power: 90-91 Only: 130 bhp (97 kW) @ 6000 rpm & 121 ftlbf (164 Nm) @ 5000 rpm

Power: 92-93 Only: 140 bhp (100 kW) @ 6300 rpm & 126 ftlbf (171 Nm) @ 5000 rpm

Transmission: 90-91: A1,S1, cable

Transmission: 92-93: YS1, cable

B18B1

NON-VTEC

Found in:

1994-2001 Acura Integra "RS/LS/GS/SE" (DC4/DB7)

Displacement: 1,834 cc (111.9 cu in)

Compression: 9.2:1

Bore: 81 mm (3.2 in)

Stroke: 89 mm (3.5 in)

Rod Length:5.394in

Rod/Stroke Ratio: 1.54

Power: 142 hp (106 kW) @ 6300 rpm & 127 ftlbf (172 Nm) @ 5200 rpm

Redline: 6800 rpm

Rev Limit: 7200 rpm

Transmission: Y80/S80

==

B18B4

NON-VTEC

Found in:

1996-2000 Honda Ballade 180i

Displacement: 1,834 cc (111.9 cu in)

Compression: 9.2:1

Bore: 81 mm (3.2 in)

Stroke: 89 mm (3.5 in)

Rod Length: 137.01 mm (5.394 in)

Rod/Stroke Ratio: 1.54

Power:

Redline: 7200 rpm

142 hp (106 kW) @ 7000 rpm & 127 ftlbf (172 Nm) @ 5200 rpm

Transmission: Y80/4254245

JDM B18C

SPEC R

VTEC

Found in:

95-00 JDM Honda Integra Type R DC2

95-00 JDM Honda Integra Type R DB8

Rev-limit: 8600 rpm

Power: 200ps (147.10 kW/ 197.26 HP) @ 8000 rpm & 17.5kgm @ 7500rpm (96 spec) 18.5kgm @ 6200 rpm (98 spec)

Transmission: S80 with Helical LSD

S80 spec: J4D (96specR & 4.4 final drive), N3E (98specR & 4.785 final drive)

Displacement: 1,797 cc (109.7 cu in)

Compression: 11.1:1

Bore: 81 mm (3.189 in)

Stroke: 87.2 mm (3.433 in)

Rod Length: 137.9 mm (5.429 in)

Rod/Stroke Ratio: 1.58

VTEC Engagement @ 5800 RPM

ECU code: P73-003 (96specR) P73-013 (98specR)

(Source: BMI Vol.1 Type R Legend)

SiR/GSR

VTEC

Found in:

93-95 JDM Honda Integra Si (DB8, DC2)

95-98 JDM Honda Integra SiR/SiR II (DB8, DC2)

98-99 JDM Honda Integra SiR-G (DB8, DC2)

Identification: Black valve cover with dual runner intake manifold

Rev-limit: 8000 Rpm

Power: 132.39 kW (180 PS; 178 bhp) @ 7200 rpm & 128 ftlbf (174 Nm) @ 6200 rpm

Displacement: 1,797 cc (109.7 cu in)

Compression: 10.6:1

Bore: 81 mm (3.189 in)

Stroke: 87.2 mm (3.433 in)

ECU code: P72

Highlights of B18C Spec R compared to standard B18C GSR

1. Camshaft - Wide-angled, high-lift, high-durability camshaft

2. Exhaust Valve Spring - High-lift, dual-layered spring

3. Spark plug - High-heat-type #7 platinum plug

4. Engine Stiffener - Aluminum die-cast, high-durability, one-piece type

5. Crankshaft - Full-counterweight, 8-weight, high-output, custom crankshaft

6. Connecting Rod - Custom TypeR rod, high-durability, lightened

7. Pistons - High-compression, low-friction, custom pistons

8. Inlet Valves - Lightened inlet valves

9. Intake Manifold - Custom tuning, single-port type.

10. Throttle Body - 62mm wide-mouth throttle body.

11. Inlet Valve Springs - High-lift, flat-surfaced, dual-layered spring

12. Port Buffing done by hand

13. Fastening of Connecting Rod done with micrometer

14. All stainless steel headers

B18C1

VTEC

Found in:

1994-2001 USDM Integra GS-R (DC2/DB8)

Displacement: 1,797 cc (109.7 cu in)

Compression: 10.0:1

Bore: 81 mm (3.189 in)

Stroke: 87.2 mm (3.433 in)

Rod Length: 137.9 mm (5.429 in)

Rod/Stroke Ratio: 1.58

Power: 170 hp (125 kW) @ 7600 rpm

Torque: 128 ftlbf (175 Nm) @ 6200 rpm

Redline: 8100 rpm (Fuel cut-off @ 8200 rpm)

VTEC Engagement @ 4400 rpm

Transmission: Y80(No LSD) 5-Speed Manual Transaxle

B18C2

VTEC

Found in:

1994-1999 Honda Integra VTi-R

AUDM Spec 1993-1999 Honda Integra VTi-R

Displacement: 1,797 cc (109.7 cu in)

Compression: 10:1

Power: 168 hp (125 kW) @ 7600 rpm

Torque: 128 ftlbf (175 Nm) @ 6200 rpm

Redline: 8200 rpm

Fuel Cut: 8300 rpm

Transmission: Y80(No LSD) 5-Speed Manual Transaxle

B18C3

VTEC

Found in:

1995-1998 Honda Integra Type R

Power: 193 PS/189 hp (141 kW) @ 8200 rpm & 127 ftlbf/172 Nm @ 7500 rp

B18C4

[VTEC] vtec

Found in:

1996-2000 UK Civic 1.8i VTi 5-door Hatch (MB6)

1996-2000 UK Civic 1.8i VTi-S (Limited Edition) 5-door Hatch (MB6)

1996-2000 UK Civic Aerodeck 1.8i VTi 5-door Wagon (MC2)

1998-1999 EU Civic Aerodeck 1.8i VTi 5-door Wagon (MC2)

1998-1999 EU Civic 1.8i VTi 5-door Hatch (MB6)

Displacement: 1,797 cc (109.7 cu in)

VTEC engagement@4,400 rpm

IAB open@5,750 rpm

Compression: 10.0:1

Power: 169 hp (124 kW) @ 7600 rpm & 117 ftlbf (158 Nm) @ 6200 rpm

Limit: 8,100 rpm

Transmission: S9B w/Torsen LSD.

0/100 km/h : 7.9 seconds (8.5 Aerodeck)

B18C5

VTEC

Found in: USDM DC2 Acura Integra Type-R (Integra Type-R)

1997-2001 Integra Type-R (**Note: This model was not produced for the 1999 production year)

Displacement: 1,797 cc (109.7 cu in)

Compression: 10.6:1

Bore: 81 mm (3.189 in)

Stroke: 87.2 mm (3.433 in)

Rod Length: 137.9 mm (5.429 in)

Rod/Stroke Ratio: 1.58

Power: 195 hp (145 kW) @ 8000 rpm & 130 ftlbf (180 Nm) @ 7300 rpm

Redline: 8400 rpm (Fuel cut-off @ 8500 rpm)

VTEC Engagement @ 6000 rpm

Transmission: S80 w/LSD

B18C6

VTEC

Found in:

1998-2001 Honda Integra UK and Euro Spec Type R

Type: 1.8 litre 16v DOHC 4 cylinder in-line

Displacement: 1,797 cc (109.7 cu in)

Compression: 11.1:1

Air intake diameter: 62 mm (2.4 in)

Bore: 81 mm (3.189 in)

Stroke: 87.2 mm (3.433 in)

Rod Length: 137.9 mm (5.429 in)

Rod/Stroke Ratio: 1.58

Power: 190 PS/140 kW @ 7900 rpm & 131 ftlbf/178 Nm @ 7300 rpm

Redline: 8400 rpm

Rev-limiter: 8700 rpm

Vtec engagement: 5700 rpm

Transmission: S80 w/LSD

B18C7

VTEC

Found in:

1999 - 2001 Honda Integra Type R (Australia)

Power: 193 PS/189 hp (141 kW) @ 8200 rpm & 127 ftlbf/172 Nm @ 7500 rpm

B20

The B20A3 and B20A5 are not considered part of the B family. See Honda B20A engine.

B20B

1996-1998 specs

NON-VTEC

Found in: USDM and JDM Honda CR-V, Honda Orthia

Displacement: 1,973 cc (120.4 cu in)

Power: 126 hp (94 kW)) @ 5400 rpm

Torque: 131 ftlbf (178 Nm) @ 4300 rpm

Rod length: 137 mm (5.4 in)

Compression: 8.8:1 or 9.2:1

Bore: 84 mm (3.3 in)

Stroke: 89 mm (3.5 in)

Redline: 6300 rpm

B20B/B20Z

1999 - 2000 specs

NON-VTEC

Found in: USDM CRV as a B20Z, JDM Honda CR-V and Honda Orthia as a B20B

Displacement: 1,973 cc (120.4 cu in)

Power: 146 hp (109 kW)) @ 6200 rpm

Torque: 133 ftlbf (180 Nm) @ 4500 rpm

Rod length: 137 mm (5.394 in)

Compression: 9.6:1

Bore: 84 mm (3.3 in)

Stroke: 89 mm (3.5 in)

Redline: 6700 rpm

B20A/B21A

The B20A3 and B20A5 are not considered part of the B family. See Honda B20A engine.

B Series Transmissions

Note: All B series Transmissions are interchangeable. YS1 casing can take S80 Internals or a hydraulic conversion kit can be used to operate hydraulic transmissions in cable operated models.

J1/S1

Found in: Integra XSI/RSI (DA6)

Type: Cable

1st: 3.230

2nd: 2.105

3rd: 1.458

4th: 1.107

5th: 0.848

R: 3.000

FD: 4.400

S1/YS1

Found in: 1990-93 USDM Integra LS/RS (DA)

Type:cable

1st: 3.230

2nd: 1.901

3rd: 1.269

4th: 0.966

5th: 0.742

R: 3.000

FD: 4.266

Y1

Found in: CRX/Civic (optional LSD)

Type: Cable

1st: 3.166

2nd: 2.052

3rd: 1.416

4th: 1.103

5th: 0.870

R: 3.000

FD: 4.266

YS1

Found in: Integra 92-93 XSI/RSI (DA6, DA9)

Type: Cable

1st: 3.307

2nd: 2.105

3rd: 1.458

4th: 1.107

5th: 0.880

R: 3.000

FD: 4.400

S80

Found in: Integra Type R 98+ (LSD)

Type: Hydraulic

1st: 3.230

2nd: 2.105

3rd: 1.458

4th: 1.034

5th: 0.787

R: 3.000

FD: 4.785

S80/Y80

Found in: JDM SiR-G (optional LSD) / 94+ USDM GS-R (no LSD)

Type: Hydraulic

1st: 3.230

2nd: 1.900

3rd: 1.360

4th: 1.034

5th: 0.787

R: 3.000

FD: 4.400

S9B

Found in: EDM UKDM MB6 (LSD)

Type: Hydraulic

1st: 3.230

2nd: 1.900

3rd: 1.360

4th: 1.034

5th: 0.848

R: 3.000

FD: 4.266

Y21/Y80/S80/S4C

Found in:

JDM 96-97 Integra R(LSD)

JDM Civic R [EK9](LSD)

JDM Civic SiR [EK4, EG6]

JDM CR-X DEL SOL SIR (EG2)(optional LSD)

USDM DEL SOL VTEC (EG2)(OPTIONAL LSD)

Type: Hydraulic

1st: 3.230

2nd: 2.105

3rd: 1.458

4th: 1.107

5th: 0.848

R: 3.000

FD: 4.400

See also

List of Honda engines

v  d  e

Honda Motor Company

Automobiles

1300  Accord  Accord Hybrid  Acty  Airwave/Partner  Ascot  Avancier  Ballade  Beat  Capa  City  City Turbo  Civic  Civic GX  Civic Hybrid  Civic Si  Civic Type R  CR-X  CR-X del Sol  Concerto  Crossroad  CR-V  Domani  Element  Elysion  EV Plus  FCX Clarity  Fit  FR-V  Freed  HR-V  Insight  Inspire  Integra  Jazz  Legend  Life  Life Dunk  Logo  Mobilio  Mobilio Spike  N360  N600  NSX  Odyssey  Orthia/Partner  Passport  Pilot/MR-V  Prelude  Quint  Rafaga  Ridgeline  Saber  Stepwgn  Stream  S500  S600  S800  S2000  That's  Today  Torneo  Vamos  Z  Zest

Acura automobiles

CL  CSX  EL  Integra  Legend  MDX  NSX  RDX  RL  RSX  SLX  TL  TSX  Vigor  ZDX

Concept automobiles

CR-Z  Dualnote  HSC  J-VX  Remix  Spocket  WOW  New Small Concept

Race automobiles

HSV-010 GT  R800  R1300  RA270  RA271  RA272  RA273  RA300  RA301  RA302  RA100  RA099  RA106  RA107  RA108

Motorcycles

CB series  CBF series  CBR series  CM/CMX series  CR series  CRF series  CX series  Fury  GL series  NSR series  RC series  ST series  VF/VFR series  VT series  VTX series  XR/XL series  XRE300  Transalp  Africa Twin  Deauville  Bros/HawkGT  NX250  Pacific Coast  TL Series (Reflex)  Valkyrie  X4

Mopeds and

light motorcycles

Ape  CT series  Cub F  Cub series  Gyro  Motra  P50  PC50  ST series/Dax  Wave series  Z series

Aircraft

MH02  HA-420

Engines

A-series  B-series  B20A  C-series  D-series  E-series  E07A  F-series  F20C  G-series  H-series  J-series  K-series  L-series  Circle L Diesel  N-series Diesel  P07A series  R-series  HF120 Turbofan  VTEC  I-DSi  I-CDTi

Robots

Honda E series  Honda P series  ASIMO

Scooters

Aero  Big Ruckus  Dio  Elite S  Elite E  Express  Helix  Juno  Metropolitan  Metropolitan II  Motocompo  NH series  Reflex  Spree  Ruckus/Zoomer  Silver Wing

Subsidiaries

Acura  Hero Honda  Honda Motorcycle & Scooter India  Honda Siel Cars India  Honda Racing  Honda F1  Honda Aircraft Company  Team G Cross Honda

Keiretsu affiliates

Keihin  Showa Corporation  Nippon Seiki

Influential people

Soichiro Honda  Nobuhiko Kawamoto  Takeo Fukui  Tadao Baba

Categories: Honda engines
About the Author

I am a professional writer from China Crafts Suppliers, which contains a great deal of information about soybean oil refined , bulk citric acid, welcome to visit!

which headlight is which for acura integra 3rd gen?

some of the integra 3rd gen headlights are like
http://images.businessweek.com/ss/06/03/honda_civic/image/95.08-integra-3d-typer.jpg

and some are like
http://upload.wikimedia.org/wikipedia/commons/5/56/Integra.jpg

Which trim has which headlight?

1st image are JDM integras
2nd image are US integras

Some people do a JDM front end conversion on their integras.

Thanks for visiting!