Chevy Small Block

Be ready to race anytime, anywhere with the RC Nitro Speeders from Hot Wheels. This fully functioning RC vehicle delivers fantastic, agile performance while being small enough to fit into your pocket. At a scale speed of 0 to 600 miles per hour in less than one second, the Nitro Speeders will make you a strong competitor wherever you go! RC Nitro SpeedersMustang Car Ages: Eight and up Requires: Four AA batteries At a Glance: Scale speed of 0 to 600 miles per hour High-speed turns and responsive control in all directions Pocket-size, multipurpose remote controller/charger/carrying case so you can take Nitro Speeder with you everywhere Sleek and lightweight with aerodynamic design. View larger. Super-powered charger keeps the car at peak performance. View larger. Mobility on the Ground and in Your Pocket The RC Nitro Speeders are designed so all parts can fit inside your pocket and go wherever you go. The remote controller doubles as a charging deck, consolidating two separate functions in a single efficient tool. The remote also serves as a carrying case, featuring a small, clear compartment that easily holds the Nitro Speeder. This way, you can carry all the tools you need in one simple piece that fits comfortably in your hand. High Speeds and Precise Driving With their small size and microchip technology, Nitro Speeders can make super-precise, high-speed turns and feature responsive control in all directions. The high-power, rechargeable battery dodges any unnecessary weight, and two 30,000-rpm motors supply power to each set of wheels. Super-size tires increase the Nitro Speeders' traction, propelling the vehicle forward, in reverse, and around sharp turns at a scale speed of 0 to 600 miles per hour. Promotes Coordination and Strategy Our testers were impressed by the acceleration and speed the Nitro Speeders could reach, and had fun learning how to use the controllers to make swift, sharp turns on hard indoor surfaces. Testers found that at first the extreme speeds of the Nitro Speeders often caused the vehicles to flip over. However, after reading the quick tips in the provided instructions and some practice with the controller, the drivers' coordination improved and Nitro Speeders became easier to drive. The Nitro Speeders come in five different varieties: Chevy Camaro Car, Dale Earnhardt Jr.'s Hammer Head Vehicle, Ken Block Ford Fiesta Rally Car, Mustang Car, and Team Hot Wheels Mustang Car. Collect 'em all to stage races and work on your racing strategy! The remote controller requires four AA batteries (not included). What's in the Box Nitro Speeder Mustang car, multipurpose remote controller/charger/carrying case, and instructions for use.

Turn up the heat on racing fun with this superfast, highly responsive micro RC car from Hot Wheels. Nitro Speeders cars come with their own carrying case, which serves as the remote control, as well as a charger to keep the car at peak performance. A super fast, highly responsive portable micro RC car that deliver amazing performance Come in their own carrying case serves as the remote control and charger Nitros small size makes them small enough to fit in your pocket, so they go wherever you go Fully functioning RC vehicle that is ready to race any time, any place Nitro Speeders are the biggest little thing in the world of RC

This 1:4 Scale Visible V-8 Engine Plastic Assembly Kit from Revell is the winner of the 2008 Parents Choice Award and Silver Honor - 1995 Doing & Learning Toys. What better way to see how an internal combustion engine works than to be able to see all of the parts move! As you turn the crank, each of the parts move, just like the real thing. The Visible V8 Engine features moving pistons and connecting rods. A hand crank operates the pistons, camshaft rocker arms and valves. The kit includes a rubber fan belt and vinyl ignition wires. Also included is a display stand and screwdriver for construction. A superb educational tool on the inner workings and construction of a V-8 engine! This is a skill level 3 model, recommended for ages 12 and up.

Be ready to race anytime, anywhere with the RC Nitro Speeders from Hot Wheels. This fully functioning RC vehicle delivers fantastic, agile performance while being small enough to fit into your pocket. At a scale speed of 0 to 600 miles per hour in less than one second, the Nitro Speeders will make you a strong competitor wherever you go! RC Nitro SpeedersKen Block Ford FiestaRally Car Ages: Eight and up Requires: Four AA batteries At a Glance: Scale speed of 0 to 600 miles per hour High-speed turns and responsive control in all directions Pocket-size, multipurpose remote controller/charger/carrying case so you can take Nitro Speeder with you everywhere Sleek and lightweight with aerodynamic design. View larger. Super-powered charger keeps the car at peak performance. View larger. Mobility on the Ground and in Your Pocket The RC Nitro Speeders are designed so all parts can fit inside your pocket and go wherever you go. The remote controller doubles as a charging deck, consolidating two separate functions in a single efficient tool. The remote also serves as a carrying case, featuring a small, clear compartment that easily holds the Nitro Speeder. This way, you can carry all the tools you need in one simple piece that fits comfortably in your hand. High Speeds and Precise Driving With their small size and microchip technology, Nitro Speeders can make super-precise, high-speed turns and feature responsive control in all directions. The high-power, rechargeable battery dodges any unnecessary weight, and two 30,000-rpm motors supply power to each set of wheels. Super-size tires increase the Nitro Speeders' traction, propelling the vehicle forward, in reverse, and around sharp turns at a scale speed of 0 to 600 miles per hour. Promotes Coordination and Strategy Our testers were impressed by the acceleration and speed the Nitro Speeders could reach, and had fun learning how to use the controllers to make swift, sharp turns on hard indoor surfaces. Testers found that at first the extreme speeds of the Nitro Speeders often caused the vehicles to flip over. However, after reading the quick tips in the provided instructions and some practice with the controller, the drivers' coordination improved and Nitro Speeders became easier to drive. The Nitro Speeders come in five different varieties: Chevy Camaro Car, Dale Earnhardt Jr.'s Hammer Head Vehicle, Ken Block Ford Fiesta Rally Car, Mustang Car, and Team Hot Wheels Mustang Car. Collect 'em all to stage races and work on your racing strategy! The remote controller requires four AA batteries (not included). What's in the Box Nitro Speeder Ken Block Ford Fiesta Rally car, multipurpose remote controller/charger/carrying case, and instructions for use.

Turn up the heat on racing fun with this superfast, highly responsive micro RC car from Hot Wheels. Nitro Speeders cars come with their own carrying case, which serves as the remote control, as well as acharger to keep the car at peak performance. A super fast, highly responsive portable micro RC car that deliver amazing performance Come in their own carrying case serves as the remote control and charger Nitros small size makes them small enough to fit in your pocket, so they go wherever you go Fully functioning RC vehicle that is ready to race any time, any place Nitro Speeders are the biggest little thing in the world of RC

Solv Tec 8oz. K-Seal TM Multi-Purpose Permanent Coolant Leak Repair - Solv Tec ST5501.

Auto Sun Visor Extenders for 85% of all cars sold in the United States.

The only thread repair product that can be used to repair both taper seat and gasket type spark plug assembliesThree insert lengths are available to accommodate all spark plug reachesPositive mechanical locking feature means the insert will never come out! The piloted reamer tap means no drilling is necessary and perfect alignment of the tapped holeAvailable in kit or set for the do-it-yourselfer and professional engine rebuilderSav-A-Thread is the easiest way to permanently repair stripped spark plug hole threadsVirtually all engines built today have aluminum cylinder headsCombining this with the growing number of do-it-yourselfers and the need for quick, easy, on-the-spot repairs makes Sav-A-Thread a must for every store and shop.

The P300-1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot. Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis. Perfect for use as a dedicated subwoofer or center channel amplifier. Click to enlarge. Heavy duty, nickel-plated clamp wire connectors. Click to enlarge. Designed and engineered in the U.S.A. for maximum performance, heat management, and acoustics. Click to enlarge. P300-1 Features 12dB/octave crossover 4 Gauge power/ground terminals Audiophile grade speaker connections MOSFET output stage MOSFET power supply Top Mounted LED Indicators CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings. Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier. Discrete Surface Mount DSM--An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. These superior components are used by aerospace, automotive, and cellular manufacturers. Dynamic Thermal Management Heat is often inefficiently dissipated across a heatsink causing "hot spots". This impacts important design goals which are: Keeping internal components cool. Maximizing potential of all components. Reducing distortion for better sound quality. Increasing efficiency to produce more power. Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier. MEHSA3 MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3) is a proprietary process that yields up to five times better heat transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heatsink. This process combined with our optimized heatsink designs, DSM (Discrete Surface Mount) technology and MOSFET devices, allows Rockford Fosgate to squeeze more watts per cubic inch from every output device as well as provide consistent thermal stability. The 3rd generation creates a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the original MEHSA material increasing it's thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance. NOMAD NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Punch EQ2 In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: A midbass hump between 100-275Hz A steep roll-off of high frequencies from 2kHz up to 20kHz Reduced bass response below 50Hz The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted. TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. TRANS•ana An award winning studio quality circuit borrowed from the pro audio company Hafler. TRANS-ana is a sound quality circuit that is a standard in the recording industry that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality, speed, and durability. P300-1 Specifications Number of Channels: 1 Rated Power: 150W x 1 @ 4-Ohms RMS 300W x 1 @ 2-Ohms RMS Total Power: 300 Watts Dynamic Power: 240 Watts x 1 @ 4-Ohms 0 degrees Res 404 Watts x 1 @ 2-Ohms 0 degrees Res Bridgeable: No Efficiency (average): 69% @ 4-Ohm 65% @ 2-Ohm Crossover Controls: High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth Low-Pass (LP): 50-500Hz 12dB/octave Butterworth Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch position Signal Input: Low level: 1 RCA pair Signal Output: n/a Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: n/a Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 6.34 Lbs. (2.87 Kg.) Dimensions (HxWxL): 2.25 x 7.625 x 9.0 (in) 5.71 x 19.37 x 22.80 (cm) Thirty Years of Rockford Fosgate Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough." The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition. What's in the Box Rockford Fosgate Punch P300-1 300-Watt Mono Amplifier, User's Manual More Amplifier Options From Rockford Fosgate If you need more features, step up to the Power Series T500-1BDCP. On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R250-1. Rockford Fosgate Punch Series Power Amplifiers Rockford Fosgate Punch P200-2 200-Watt Stereo Amplifier Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer

The P300-1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot. * 12dB/octave crossover * 4 Gauge power/ground terminals * Audiophile grade speaker connections * MOSFET output stage * MOSFET power supply * Top Mounted LED Indicators * CEA-2006 Compliant * Number of Channels 1 * Rated Power: continuous power 150W x 1 @ 4-Ohms RMS * 300W x 1 @ 2-Ohms RMS * Total Power: total sum of 'rated power' 300 Watts * Dynamic Power: powercube measurement (info) 240 Watts x 1 @ 4-Ohms 0 Res * 404 Watts x 1 @ 2-Ohms 0 Res * Bridgeable No * Efficiency (average) 69% @ 4-Ohm * 65% @ 2-Ohm * Crossover Controls High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth * Low-Pass (LP): 50-500Hz 12dB/octave Butterworth * Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or * Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz * Function depends upon LP/AP/HP switch position * Signal Input Low level: 1 RCA pair * Signal Output n/a * Power Input Connector Block * Power Wire Gauge 4 AWG * Speaker Output Connector Screw terminal barrier strip * Speaker Wire Gauge 8 AWG to 18 AWG * Heat Sink Type Cast aluminum * Cooling Convection * Remote Controls Optional PEQ Remote Punch EQ: (overrides built-in Punch EQ2) * Visual Indicators Power * Thermal * Protect * Circuit Topology Class Class A/B * Frequency Response 20Hz to 20kHz +/- 1.0dB * Shipping Weight 6.34 Lbs.; (2.87 Kg.) * Dimensions (HxWxL) 2.25 x 7.625 x 9.0 (in); 5.71 x 19.37 x 22.80 (cm)