Thanks for visiting our site!
Diesel Valve Cover
Checkout Ebay Auctions For The Cheapest Prices
![]() |
|
Mercedes (84-95 Diesel) Breather Hose Connector at Valve Cover US $13.90
|
Mercedes e300 Diesel Breather (Elbow ) Hose on Valve Cover US $17.90
|
| Powered by phpBay Pro |
Check out Amazon:
![]() |
Mr. Heater 35,000 BTU Propane Forced-Air Heater #MH35FA List Price: $178.91 Sale Price: $99.99 |
|
The MH125FAV is the least powerful of Mr. Heater's line of propane forced-air heaters for smaller jobs (see the MH55FAV and the MH85FAV). The heater gives you 35,000 Btu--enough to heat 800 square feet. Though the larger models give you more Btus, each heater in the line shares the same basic features, including an automatic shutoff with loss of flame or power supply and a high-output fan that circulates heat quickly. Hooking the heater up to the 20-pound propane cylinder (not included) is easy, and the 10-foot hose and regulator are included. CSA certified. One-year limited warranty. What's in the Box.. Heater (heater body kit, control box assembly, valve with thermocouple, wire assembly, electrode, high limit switch [240 degrees F], thermocouple, motor 0.74 A, grille assembly, fan blade, 6.75 x .75 pitch, power, cord assembly, strain relief bushing, piezo ignitor, clip handle, handle), 10-foot hose, regulator, operating instructions and owner's manual. The MH125FAV is the least powerful of Mr. Heater's line of propane forced-air heaters for smaller jobs (see the MH55FAV and the MH85FAV). The heater gives you 35,000 Btu--enough to heat 800 square feet. Though the larger models give you more Btus, each heater in the line shares the same basic features, including an automatic shutoff with loss of flame or power supply and a high-output fan that circulates heat quickly. Hooking the heater up to the 20-pound propane cylinder (not included) is easy, and the 10-foot hose and regulator are included. CSA certified. One-year limited warranty.--Josh DettweilerWhat's in the BoxHeater (heater body kit, control box assembly, valve with thermocouple, wire assembly, electrode, high limit switch [240 degrees F], thermocouple, motor 0.74 A, grille assembly, fan blade, 6.75 x .75 pitch, power, cord assembly, strain relief bushing, piezo ignitor, clip handle, handle), 10-foot hose, regulator, operating instructions and owner's manualFive Tips for Buying a HeaterChoosing a space heater is a matter of sifting through a bewildering array of types, power ratings, and fuel sources. Let's break it down a little to make the process easier.What are the different types of space heaters?Radiant heaters emit infrared radiation that directly warms the objects in front of the heaters (rather than the surrounding air). If you only need heat by a desk or in a small section of a room, a radiant heater is quiet and will use very little power.Forced-air heaters use a fan to blow air that has been warmed by metal or ceramic heating elements. A forced-air heater is appropriate for quickly heating up a small- to medium-sized room, but can be noisy.Convection heaters draw cold air from the floor; the air is warmed by heating coils and emitted from the top of the heater. A convection heater is appropriate for quickly heating up a small- to medium-sized room, but also can be noisy.Radiators work by heating oil enclosed in a reservoir, gradually heating the surrounding air. If heating speed isn't an issue, you might want to opt for a radiator. These are extremely quiet and effective--perfect for bedrooms. Should I buy an electric or a combustion model?If you want a heater that will be available in emergencies, or that can heat areas larger than a single room, choose a "combustion" model--one that is powered by a gas or fuel like propane, kerosene, natural gas, or diesel. Which fuel type you choose depends largely on convenience and local availability. For example, diesel would be appropriate for a heater you take with you on long car trips. How powerful a heater do I need?Heaters are rated by BTU, which stands for British Thermal Unit (the amount of heat needed to heat one pound of water by 1 degree F). To find out how many BTU you need: Calculate the volume of the space to be heated by multiplying square footage by height. Multiply that number by 4 if your insulation is poor, 3 if it's average, or 2 if it's good.The resulting number is a ballpark figure for how many BTU you'll need.Do space heaters cost a lot to operate? As a general rule, electric space heaters are more expensive to use than combustion models. To ensure energy efficiency, a thermostat is a must-have feature for any heater. For radiant heaters, models with a 360 degree heating surface can heat larger spaces. If you need a forced-air heater, models with ceramic elements tend to be more efficient.Are space heaters a fire hazard?Space heaters are implicated in about 25,000 residential fires every year. To ensure proper safety, always follow the manufacturer's usage instructions and fill out the warranty card to receive informational updates from the manufacturer. Also, look for extra safety features such as an automatic shutoff switch that can shut down the unit if, for example, it gets upended. In addition, choose a model where the heating element is adequately enclosed within the unit. |
![]() |
Generac 5734 GP15000E 22,500 Watt 992cc OHV Portable Gas Powered Generator With Electric Start List Price: $2,966.00 Sale Price: $2,399.00 |
|
Includes Battery, Engine Oil, Maintenance Kit, Instruction Sheets Featuring a compact, wheeled frame for easy transport, the Generac 15,000-Watt Portable Gas-Powered Generator with Electric Start provides a reliable power supply wherever you need it. A Generac OHVI (overhead valve industrial) engine delivers performance and power, while a sturdy steel-tube cradle protects the generator's exterior. For safe and comfortable use, the circuit-breaker outlets prevent power overloads, and the low-tone muffler makes for ultra quiet operation. .caption { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: 20px; } img.withlink {border:1px black solid;} a.nodecoration {text-decoration: none} Portable gas-powered generators deliver power when you need it, where you need it--from outdoor parties to construction sites. View larger. Circuit breaker protected outlets guard against circuit overload for reliable performance. View larger. The hardened steel-tube cradle, convenient handles, and wheel kit ensure durability and portability. View larger. Generac's OHVI® engine is designed specifically for generators, and it lasts three to four times longer than competitive engines. View full diagram. Determine your requirements for a portable generator: click here to view wattage charts. (Note for California and Canadian residents: This model is not CARB-compliant (units sold to California must be CARB-compliant) or CSA-certified.) A Durable Power Supply Wherever You Need It The Generac 15,000-Watt Generator with Electric Start is an ideal portable generator to have at home, on the job site, or wherever you need power. Its compact frame--48.5 x 31 x 39.5 inches (LxWxH)--is fitted with lifting eye handles and pneumatic, all-terrain wheels for easy portability. And with its hardened steel-tube cradle, this rugged generator holds up well for frequent travel, allowing you to look forward to years of operation. Plus, this model features an electric ignition for fast, easy start-up. Thanks to its versatile design, this generator adds comfort and possibility to any situation. Use it to keep your family safe and well-equipped through unexpected blackouts or make construction jobs faster and easier. A Low-Maintenance, High-Performance OHVI Engine Designed specifically for generators, the Generac 15,000-Watt Generator with Electric Start's heavy-duty 992-cc OHVI (overhead valve industrial) engine boasts a host of features. An exclusive X-Torq governor maximizes the engine's performance to keep it running without stalls. And so engine components continue moving smoothly, a pressurized lubrication system sends oil directly to critical areas. Thanks to this full-pressure lubrication system, the engine can employ an automotive-grade, spin-on oil filter that sifts out dirt and other unwanted substances. The oil filter works alongside a dual-element air filter. Together, the two keep engine performance at a maximum and maintenance at a minimum. Plus, this generator's sturdy, 16-gallon resin tank ensures a full 10 hours of operation at a 50-percent load, letting you relax for hours of use. The automatic-idle control reduces fuel usage and noise, while the tank's built-in fuel gauge lets you monitor fuel levels at a glance. Generac even provides you with your first supply of oil. Plenty of Wattage to Run a Full Range of Appliances The Generac 15,000-Watt Generator with Electric Start supplies 15,000 output watts and 22,500 maximum watts (for start-up of devices). It has an A/C voltage of 120/240 and a frequency of 60 hertz. For unexpected blackouts, this is enough wattage to run home appliances such as security systems, computers, and electric stoves, as well as air conditioning systems and sump pumps. (A manual transfer switch is required to connect to air conditioning systems.) For construction and landscaping applications, it's enough to support large devices such as lawn mowers, belt sanders, and table saws. And for camping and outdoor events, it can run portable stereos, outdoor lights, and electric grills. (Note: All appliances should be checked for actual wattage ratings.) Safe, Quiet Operation with Overload-Protected Outlets If security and quiet operation are important to you in a generator, then the Generac 15,000-Watt Generator with Electric Start is an ideal choice. Its outlets (two 120-volt, two 120-volt GFCI, one 120-volt 30 Amp twist lock, one 120/240-volt 50 Amp, and one 12 VDC battery charger) are circuit-breaker protected, guarding against power overloads and allowing the generator to smoothly send power to your appliances. And the low-tone muffler means the generator runs at a comfortable noise level that easily blends into the background. This generator is backed by a two-year limited warranty. What's in the Box Generac 5734 GP Series GP15000E 15,000-Watt 992-cc OHVI Portable Gas-Powered Generator with Electric Start (Non-CARB Compliant), 12VDC 365-CCA battery, first oil supply, wheel kit, maintenance kit, and manual. .matrix { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; } .matrix_header { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 12px; font-weight: bold; } .matrix_title { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 18px; font-weight: bold; } ul.matrix { list-style: inside disc; text-indent: -12px; font-size: 12px; line-height: 1.5em; } Compare the Generac GP Series Portable Generators Model # GP1800 GP3250 GP5000 GP5500 GP6500 GP7000 GP7000E GP8000 GP8000E GP15000E GP17500E Running/starting watts 1800/2050 3250/3750 5000/6250 5500/6875 6500/8000 7000/8750 7000/8750 8000/10000 8000/10000 15000/22500 17500/26250 Fuel tank size (gallons) 4.0 4.0 6.6 6.6 6.6 8.0 8.0 8.0 8.0 16.0 16.0 Approx. run time @ 50% (hours) 14.5 12.5 10 10 10 11 11 11 11 10 10 Electric start (battery included) Yes Yes Yes Yes Dimensions (L x W x H - inches) 23.5 x 17 x 17.5 25 x 21 x 19.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 33.5 x 26.5 x 27.5 48.5 x 31 x 39.5 48.5 x 31 x 39.5 Shipping weight (pounds) 79 91 167 167 172 177 182 187 192 363 390 |
![]() |
Honeywell HW7500E 9375 Watt 15 HP 420cc OHV Portable Gas Powered Home Generator With Electric Start List Price: $1,480.00 Sale Price: $1,264.32 |
|
Description: 7500E Electric Start Model includes Honeywell(TM) Big-Bore, 420 cc, OHV engine, designed for power and durability with oversized muffler for quiet operation. Unit also includes Smart Start(TM) color-coded starting controls and 24-hour instructions at 1-888-RECOIL-8. Easy to operate with simplified power control center and a 3-year limited warranty. Includes never-flat tires, high-leverage handle, 4-in-1 power cord, first liter of oil and funnel to get you started. Comfort and Convenience: The Honeywell 7500E Portable Generator features: First liter of oil with a funnel to pour it, High-leverage handle for easy mobility, Never-flat wheels, Electric start with battery & recoil, Sound Filtered - The oversized muffler is engineered for quiet operation, Smart Start(TM) - Comes with color-coded starting controls and 24-hour instructions at 1-888-RECOIL-8. (732-6458), Easy to Operate - Features a simplified power control center and bonus 4-in-1 power cord. Everything You Need Except Gas! First Liter of Oil and Oil Funnel - Included 20ft, 30amp 4 way tap Power Cord - Included On Board Battery - Included Complete Wheel Kit - Included High Leverage Handle - Included Power and Security: Durable - Backed by a 3-year limited warranty, Electronics Friendly - SurePower(TM) Alternator provides voltage-regulated power, Honeywell(TM) Engine - The Big-Bore, 420 cc, OHV engine is designed for more power and durability. Specifications: Continuous Watts: 7500 Watts Maximum Watts: 9375 Watts Amps: 31.3 A @ 240 Volts Engine Type: Honeywell / Big-Bore, OHV Engine cc: 420 Start: Electric Start w/ Battery Outlets: L14-20 120/240VAC (Floating Neutral), 15/20A 120VAC, 15/20A 120VAC, 15/20A 120VAC, 15/20A 120VAC Fuel Tank: 6.5 Gallons Run Time: 7.0 Hours @ 50% Load Frame: 1.25 in Steel - Industrial Vibration Isolators Portability: Never-Flat Wheels and Handle Kit (Assembly Required) Added Features: Low Oil |
![]() |
BMW 5 Series (E60, E61) Service Manual - 2004, 2005, 2006, 2007, 2008, 2009, 2010: 525i, 528i, 530i, 535i, 545i, 550i List Price: $149.95 Sale Price: $570.72 |
|
The BMW 5 Series (E60, E61) Service Manual: 2004-2010 contains in-depth maintenance, service and repair information for the E60 and E61 platform BMW 5 Series models from 2004 to 2010. The aim throughout has been simplicity and clarity, with practical explanations, step-by-step procedures and accurate specifications. Whether you re a professional or a do-it-yourself BMW owner, this manual helps you understand, care for and repair your BMW.The do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information. Even if you have no intention of working on your vehicle, you will find that reading and owning this manual makes it possible to discuss repairs more intelligently with a professional technician.Models covered525i and 530iM54 engine (2004-2005)N52 engine (2006-2007)528iN52K engine (2008-2010)535iN54 twin turbo engine (2008-2010)545iN62 V8 engine (2004-2005)550iN62 TU V8 engine (2006-2010)Manual transmissions (remove, install, external service)Getrag GS6-17BGZF GS6-37BZ , ZF GS6-53DZSequential Manual Gearbox (SMG) (remove, install)ZF GS6S37BZ, ZF GS6S53BZAutomatic transmissions (remove, install, external service)ZF GA6HP19Z, GA6HP19Z TUZF GA6HP26Z, GA6HP26Z TUTechnical features:Condition based service (CBS) maintenance procedures from replacing the cabin microfilter to checking and resetting service intervals. This manual tells you what to do and how and when to do it.Cylinder head cover gasket and crankshaft seal service (includes removal and installation of Valvetronic motor).Cooling system and radiator service.Fuel injection and ignition system diagrams and explanations.Information about advanced technical features such as Valvetronic, VANOS, twin turbochargers, DSC (dynamic stability control), dynamic drive (active stabilizer bars), active steering, and xDrive.Suspension repair procedures.Brakes, steering and ABS troubleshooting and repair.Heating and air-conditioning repair, including A/C component replacement.Body and hood repairs and adjustments.Electrical system service, with an easy-to-use illustrated component locator section.Comprehensive wiring schematics, including fuses and grounds.BMW OBD II diagnostic trouble codes, SAE-defined OBD II P-codes, as well as basic scan tool operation.BMW factory tolerances, wear limits, adjustments and tightening torques. |
![]() |
Mag-Hytec Rear Differential Cover 03-12 Dodge Ram 2500 & 3500 Cummins 5.9L & 6.7L Diesel w/ 14-11.5 Axle Sale Price: $270.75 |
|
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load. Avoid costly reapirs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer Average of double the fluid capacity Ease of Service The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling. The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed. The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug. The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level. The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone. Plugs, cap screws and washers are stainless steel in most applications. Mag-Hytec manufactures the best covers and pans available today. |
![]() |
Moeller DuraMax Flo n' Go LE Fluid Transfer Pump and 14-Gallon Rolling Gas Can List Price: $139.99 Sale Price: $102.86 |
|
Moeller 14 - gallon Wheeled Gas Dock with Pump. Sturdy, 6" wheels make maneuverability a breeze! A 14-gallon Gas Dock and Pump with the added convenience of wheeled transport! Fill 'er up: Composed of a durable, high-density polyethylene in vibrant red for use with gasoline, diesel, or kerosene fuels ; Comes complete with a patented Flo n' Go hand pump pump holder handle; 14 gal / 53L volume capacity and a 10' long fuel hose ; Includes a bolt on hanger for convenient hose storage; Quickly refuels, using a UL approved, mechanically vented fill cap ; Fluid transfer on level surfaces with minimal priming; Ergonomically designed, heavy-duty top handle with extra deep base unit handholds for transport ; Recessed grooves provide nuisance free strapping locations for safer transport; Dual mechanical shut-off valves, at both tank and hose, for spill-proof Flo n' Go disconnection ; Meets D.O.T. UN transportation requirements. ; Order Now! Moeller Duramax 14-gallon Wheeled Gas Dock Whether your fuel needs include watercraft, hunting and camping, generators, backyard power equipment, or professional landscaping tools, the Duramax Flo 'n' Go fluid transfer pump and rolling gas can make refueling a snap. The Flo 'n' Go is made of a durable, high-density polyethylene material in red that safely holds gasoline, diesel, or kerosene fuels. When it comes time to refill, the pump's patented Flo 'n' Go hand pump and pump holder handle takes over, letting you transfer fluids on level surfaces with minimal priming. And thanks to the dual mechanical shutoff valves at both the tank and hose, the tank's disconnection is spill-proof, providing a safe fuel transfer for both you and the ecosystem. The tank includes a sizable 14-gallon/53-liter capacity and a 10-foot-long fuel hose, as well as a bolt-on hanger for convenient hose storage. And users will love the sturdy 6-inch wheels, which makes it a breeze to maneuver the tank over rough terrain. Other features include an ergonomically designed, heavy-duty top handle with extra-deep base unit handholds for transport; a UL-approved mechanically vented fill cap; and recessed grooves that provide nuisance-free strapping locations for safer transport. The Flo 'n' Go fluid transfer pump meets all DOT and UN transportation requirements. |
Here are some more information for Diesel Valve Cover:

Attention Plasma Cutters! General Welding Safety is not enough.
There are a few things about plasma cutting safety that are different from general welding safety tips
This short list of plasma cutter safety tips is geared toward light duty plasma cutting using compressed air not large industrial units that use gas mixtures and water cutting tables.
Electric Shock Can Kill
- Operating a plasma cutter completes an electric circuit between the torch and the workpiece. The workpiece and anything touching the workpiece are part of the electrical circuit.
- Never touch the torch body, workpiece or the water in a water table when the plasma system is operating.
Voltages & Currents
- Plasma cutter output voltages are much greater than welding voltages, usually 100-200 volts.
Precautionary Measures
- Do not pick up the workpiece, including the waste cutoff, while you cut. Leave the workpiece in place on the workbench with the work cable attached during the cutting process.
- During plasma cutting operations do not move the work clamp.
Wear insulated gloves and boots, and keep your body and clothing dry.
- Do not stand, sit or lie on or otherwise touch any wet surface when using the plasma cutter system.
- Insulate yourself from work and ground using dry insulating mats or covers big enough to prevent any physical contact with the work or ground. If you must work in or near a damp area, use extreme caution.
Work Cable
- Ensure metal-to-metal contact between work cable and workpiece or work table.
- Work cable clamp should make contact with clean metal free of rust, dirt, painted surfaces, etc.
- Do not attach work cable to the piece that will fall away when the cut is complete
Plasma cutter Arc Rays
Plasma cutter arc rays produce intense visible and invisible (ultraviolet and infrared) rays that can burn eyes and skin.
Protective Clothing
- Guantlet gloves, safety shoes and hat.
- Flame-retardant clothing to cover all exposed areas.
- Cuffless trousers to prevent entry of sparks and slag.
- Remove combustibles, such as a butane lighter or matches, from your pockets before cutting.
Noise Levels of Plasma Arc Cutting
- Plasma arc cutting systems can generate noise levels in excess of 120 dB during high-amperage cutting operations.
- Ear protection should be used when operating or working near plasma arc cutting operations.
Toxic Fumes & Gases
Plasma arc cutting can produce toxic fumes and gases that deplete oxygen and cause serious injury.
- Keep the cutting area well ventilated or use an approved air-supplied respirator.
- Do not cut in locations near degreasing, cleaning or spraying operations. The vapors from certain chlorinated solvents decompose to form phosgene gas when exposed to ultraviolet radiation.
Pacemakers & Hearing Aids
- Pacemaker and hearing aid operation can be affected by magnetic fields from high currents. Pacemaker and hearing aid wearers should consult a doctor before going near any plasma arc cutting and gouging operations
Overall Plasma Safety
- The plasma arc cutting process can be very safe.
- By paying attention to safety standards and correctly setting up and operating the system, plasma arc cutting poses no more a threat than most welding processes.
For more information on plasma cutting and other welding information, visit http://www.weldingtipsandtricks.com
Mercedes-Benz CLK-Class
The Mercedes-Benz CLK-Class was a mid-size rear-wheel drive coupé/convertible. While it was based on the W202 and W203 platforms of the C-Class, its styling cues, engine, and price range are closer to that of the E-Class, with Mercedes-Benz slotting the CLK as a coupé version of the W210 and W211 E-Class sedan/wagon. The CLK succeeded the W124 E-Class Coupe and it was in turn replaced by the W212 E-class Coupe.
1996-2002 (W208)
The first-generation CLK was introduced in 1996, 3 years after the 1st generation (W202) C-Class model. The launch of the CLK also marked Mercedes' first foray into the mid-sized coupe market, as the W124 E-Class Coupe was considered a two-door sedan rather than a coupe.
Less expensive than the sporty SL-Class convertibles, the first generation CLK cabriolet was the most successful convertible Mercedes-Benz ever offered; 41,520 were sold in the United States from 1999 to 2003, and more than 115,000 were sold throughout the world.
The CLK cabriolet is known in the UK as the Loafer because of its resemblance in profile to an Oxford Brogue.
Versions offered in the first generation were the CLK 200(136 PS), CLK 200 Kompressor(192 PS), CLK 230 Kompressor(193 PS), CLK 320(218 PS), CLK 430(279 PS) and the CLK 55 AMG(347 PS). All were available in both coupé and convertible form.
The CLK 320 Coupé was introduced in the 1997 model year, powered by a 3.2 L V6 engine. The CLK 320 Cabriolet and the 4.3 L V8-powered CLK 430 appeared in 1999. The high-performance CLK 55 AMG, which was introduced first in Europe in 2000, was powered by the "M113" 5.4 L V8 engine. The CLK 55 AMG cabriolet became available in 2002, the last year of this body style.
2003-2009 (W209)
The CLK coupé was redesigned for 2003, with the cabriolet following in 2004. The current generation of the CLK-Class is 61 mm (2.4 in) longer, 18 mm (0.7 in) wider and 28 mm (1.1 in) higher than its predecessor.
* The CLK 270 CDI features a 2.7 L, 5 Cylinder engine and a five-speed tiptronic transmission.
* The CLK 320 features a 3.2 L, 18-valve single overhead cam (SOHC) V6 engine and a five-speed automatic transmission. The CLK320 was replaced by the CLK350 for 2006.
* The CLK 350 features a 3.5 L, 24-valve dual overhead cam (DOHC) V6 engine and a seven-speed automatic transmission.
* The CLK 500 features a 5.0 L, 24-valve SOHC V8 engine and a seven-speed automatic transmission. It received a new 5.5 L 32-valve DOHC V8 engine in 2007 (in America, it was called CLK 550).
* The CLK 55 AMG features a 5.4 L, 24-valve SOHC V8 engine and a 5-speed automatic transmission. The base price is US$69,900 for the coupé and US$87,000 for the cabriolet. The CLK55 AMG coupé was dropped in North America after the 2005 model year, though the cabriolet is still offered. The CLK55 was replaced by the CLK63 for 2007.
* The CLK63 AMG features a 6.2L V8 with a seven-speed automatic transmission. Available in both Coupé and Cabriolet, the CLK63 boasts 481 hp (354 kW) and 465 ft·lb (630 newton m) of torque. Compared to its predecessor the CLK63 has 31% more power and 23% more torque. The CLK63 is currently being used as the safety car in Formula One. It accelerates from 0-60 mph in 4.3 seconds.
* The CLK63 AMG Black Series features a 6.2L V8 with a seven-speed automatic transmission. Only available in Coupé, the CLK 63 BS delivers 507 hp (373 kW) and 465 ft·lb (630 newton m) of torque. It accelerates from 0-60 km/h in 4.1 seconds.
In Europe there was also the CLK 200 K (1.8 R4), CLK 220 CDI (2.1 I4 diesel), CLK 240 (2.6 V6), CLK 270 CDI (2.7 R5 diesel), CLK 280 (3.0 V6), CLK 320 CDI (3.0 V6 diesel); (all standard with 6-speed manual transmission, automatic transmission is optional)
2009 Mercedes-Benz CLK63 AMG Black Series
Each model seats four and in the US this includes an all-leather interior with burl walnut trim. For Europe the models are available as "Elegance" or "Avantgarde" versions, basically Luxury or Sport specification where the Elegance uses Burr Walnut trim and polished alloy wheels the Avantgarde uses alloy trim and wider, sportier wheels. The price and specification for European models is otherwise the same. The 4 cyl. cars wear 16" wheels While the CLK320, CLK350 and CLK500 come with 17 inch (432 mm) alloy wheels, the CLK55 AMG sports 18 inch (457 mm) wheels. The cabriolets have a remote-operated automatic soft-top and sensor-controlled roll bars. Since 2000, all US cars come standard with a Tele Aid emergency assistance system, automatic dual-zone air conditioning, 10-way power front seats and rain-sensing windshield wipers. Seven-channel digital surround sound comes standard. A Keyless Go system, navigation system, Parktronic system, and bi-xenon HID headlamps are all available as options. All models come with four side airbags.European cars differ considerably and are usually specced depending on the buyer's needs.
On certain 2003 models there is a radiator leak which can cause thousands of US Dollars in repairs if not caught early. This problem is known by Mercedes-Benz, whom account around 5% of these vehicles have the problem, although they will not offer any assistance and have not been recalled.
2010-present (W207)
A two-door E-Class Coupe was introduced as part of the new eighth-generation E-Class, at the 2009 Geneva Motor Show, as Mercedes-Benz intended to leverage the better-known E-Class nameplate. However, like the two generations of the CLK-Class, the new E-Class Coupe is based on the contemporary C-Class platform. It will be produced in Bremen.
About the Author
I am a professional editor from
http://www.himfr.com/
, and my work is to promote a free online trade platform. http://www.himfr.com/ contain a great deal of information about
auto cool air vent
,
automatic shoe polisher
,
vinyl auto seat covers
, welcome to visit!
I have a diesel engine that will not start, new fuel, and either but it will not fire, any ideas?
engine is on a generator with about 800 hrs. changed fuel and fuel is getting to cylinder, pulled valve cover and valves are moving like they should, sprayed either in air intake and still no pop. any ideas other than to scrap the engine
What brand of Diesel engine is it? If it is a Detroit Diesel try resetting the air box lever.
1995 Buick LeSabre Custom from North America - Comments
Everything has gone wrong with this piece of junk. I have had to twice replace the brakes in two years. I have replaced all four struts. Very expensive!
Thanks for visiting!


US $329.95






