Engine Oil Filter

Feature: CE, GS, ETL, CETL and ROHS Approved. Durable aluminum alloy. High efficiency, Low noise and Oil free. Ensure smooth air-flow and zero pulse. Pressure adjustable. Thermally protected Automatic On/Off function for safe using. Start at 3 Bar(43 psi) and Stop at 4 Bar(57 psi). Power Saving. Simple used One On/Off Switch. Air Tank can decrease the impulsive force of flowing air to keep stable air pressure and continued airflow. Also help to filter moisture to keep the spraying airflow dry. Red Relief Valve for releasing the pressure of air tank to protect the compressor. It will start automatically when the pressure higher than 8 Bar(114 psi). The Water Drain Valve at the bottom of compressor for discharging water from the air tank after using the compressor a long time. Pressure Regulator and Filter with Gauge can help you to check the air leakage and make air adjustment precisely. The Water Release Valve can be open to release the moisture at any time. Portable with an easy carrying Handle. Skidproof Rubber Feet for table use. Suitable for diam 0.2-1.0mm air brush with nozzle. One 6 Ft Air Hose with airproof rubber for connecting air compressor and air brush easily. Please read the instruction manual before using. The Advantages of Air Tank of Compressor: Provide a reservoir of pressurized air that you can draw from while spraying. You can be draw air at a regulated pressure from tank directly instead of from the piston cylinder. Eliminate the tiny pulsation in the air supply caused by the physical motion of piston to pressurize air. Help to make stable air pressure and continued airflow. Extend the life span of the engine of compressor. Compressor pumps air just when the tank needs enough air instead of always being on. As the first line moisture trap, it's good for filtering water and can make the spraying airflow more dry.

The Go-Ped GSR Sport combines the powerful GSR40 style chain drive system and the versatility of the original Sport Go-Ped. The gas-powered scooter is equipped with the fuel-efficient and quiet GPL290 engine, which provides a smooth acceleration to reach speeds above 21 miles per hour in stock configuration. The GSR Sport's patented extra-light heavy-duty frame, cantilevered fork, and gas tank coupled with a heavy-duty rear axle, unbreakable fender, and Go-Ped folding feature make it the ideal Go-Ped machine for cruisers and racers alike. The gas-powered Go-Ped GSR Sport city scooter. Specifications: Engine: 29cc two-stroke 50:1 oil ratio Maximum speed: 20 MPH Fuel capacity: 1 liter Estimated fuel economy: 100 MPG Transmission: Chain drive with centrifugal clutch Frame: 4130 chromyl Fork: 4130 chromyl Handlebars: 6061 T6 aircraft-grade aluminum Wheel Type: 6" Solid Go-Active Rubber replaceable tire Front brake: Wheel Caliper Dimensions, unfolded: 36 x 14 x 42 inches (L x W x H) Dimensions, folded: 36 x 14 x 14 inches (L x W x H) Weight: 24 pounds Maximum load: 400 pounds Manufacturer's Warranty Lifetime warranty on the frame and fork The Go-Ped Story Beginning in 1985, Steve Patmont, his wife Hannelore, and two sons Gabe and Tim launched Patmont Motor Werks, creators of the Go-Ped Brand of original folding motorized scooters. They began by building Go-Peds in their Pleasanton California garage for friends and family that just had to have one and it blossomed from there. Knowing the market opportunities were endless for their fun and safe, carefree design, the Patmont family secured a patent and began shopping their invention around to purveyors of yachts and personal aircraft as a light and portable alternative transportation device to extend transportation choices for various commuting and recreation uses. The Patmont family introduced the patented Cantilevered Independent Dynamic Linkless Indispension (C.I.D.L.I.) in 2005. This revolutionary yet simple and extremely effective suspension system redefined the portable transportation market once again. Off-road enthusiasts and those simply wishing for a more comfortable ride can also experience the amazing benefits of these practical and portable Gopeds. Today Patmont Motor Werks is the world leader in personal transportation and proudly produces the world's finest portable transportation devices out of it's "enlarged garage," a 70,000 square foot state-of-the-art production facility in Minden, Nevada. The Patmont family has kept PMW strong by constantly innovating new and improved products. In addition to an excellent selection of scooters and carts, the introduction of the ESR750 pure electric GoPed scooter line in 2003 offers a zero emission transportation device for those wishing to reduce climate change, their carbon footprint, beat the rising prices of fossil fuel, and foreign oil dependence.

The Sport Go-Ped® is the Original California Go-Ped® Scooter, which inspired the design and engineering of all Go-Ped® Scooters. Strong, Durable and highly Reliable, this all American Classic, is now its second decade of production and is the World's most popular scooter. Its versatility appeals to commuters and fun lovers of all ages.

Hoca Gear Sets in a wide variety of sizes and combinations for 150cc and 125cc GY6 4-stroke engines commonly found on Full-Size Street Scooters and Off-Road Vehicles. Choose from 14, 15, 16 & 17 Front Tooth combinations and 36, 37, 38 & 39 Rear Tooth combinations. Please see our Warranty & Returns Policy.

K&N AIR FILTER RECHARGER SERVICE KIT, AEROSOL SPRAY CAN -- For Use On K&N Filters Only, Six Step Maintenance System Designed To Recharge Your K&N Air Filter, Restores Air Flow Efficiency

Fresh Breeze, CF10134, Cabin Air Filter, Uses The Natural Deodorizing Qualities Of Arm & Hammer Baking Soda, Help Absorb Odors & Freshen The Air, Premium Efficiency, Filters 98% Of Road Dust & Road Pollen, Odor Absorption Combined With Carbon Embedded Into The Filter Assist In Cleaning Outside Air Flowing Through The Vehicle's Ventilation System.

The FRAM Fresh Breeze cabin air filter is an easy to install air filter that both filters and deodorizes the air drawn into your vehicle, as well as improves available airflow critical to the efficient workings of air conditioning and heating systems. Designed utilizing the first of its kind mix of active carbon and baking soda woven into the fibers of the filter, it has the ability to remove up to 98% of contaminants that drivers, passengers and vehicle air ducts are exposed to, while also providing twice the protection against commonly occurring odors than other cabin air filters. Active carbon and baking soda in filter for better in-vehicle air quality and flow. View larger. What is a Cabin Air Filter? Not nearly as well-known as familiar oil and standard air filters, many drivers may never even have heard of a cabin air filter. Usually located either inside the passenger compartment near the glove compartment, or under the hood near the windshield, they are used to filter air drawn into your car from the outside for the comfort of passengers, as well as for use by air conditioning and heating systems. They are designed to minimize particles both large and small, as well as allergens and other contaminants and are used in approximately 80% of the vehicles built since the 2000 model year. It is recommended that they be replaced on either an annual basis, or every 15,000 miles. Like any other automotive filter, neglecting to do this can lead to possible risks to your vehicle and/or passengers, in this case including impeded performance of your heating or air conditioning systems by limiting the flow of fresh clean air used by those systems, as well as possible corrosion inside the system and musty or even noxious air vented throughout the vehicle. Removes up to 98% of road dust, pollen and other contaminants, as well as most common odors. View larger. Unique Carbon/Baking Powder Technology The FRAM Fresh Breeze Cabin Air Filter utilizes a unique technology that combines the natural filtering properties of activated carbon and the renowned deodorizing properties of Arm & Hammer baking soda. Infused together within the filter's folds this allows for the removal of 98% of road dust and road pollen* that your vehicle's air circulation system takes in. In addition, this combination also allows for superior protection against odors drawn from outside sources, providing twice the ability to deodorize common odors compared to filters not treated with carbon and baking soda. Key Features Premium Efficiency - Filters 98% of road dust and road pollen dramatically improving in-vehicle air quality* Improved Air Flow - Periodic replacing of cabin air filters improves air intake air flow used in heating and air conditioning systems Odor Absorption - The FRAM Fresh Breeze Cabin Air Filter packs twice the ability to deodorize common odors drawn from outside sources compared to filters not treated with carbon and baking soda Fresh Essence - The FRAM Fresh Breeze Cabin Air Filter removes the reoccurring musty smell that can develop in air conditioning and heating systems Easy to Install - Installs quickly and easily in most cars in minutes with minimal, or even no tools, depending on car model Warranty FRAM filters are warranted against defects in design, materials and workmanship. New vehicle warranties remain in effect when FRAM filters are installed according to directions on FRAM filter packaging and replaced at least as often as vehicle manufacturer's recommended change intervals. About FRAM Today FRAM is known as America's number one oil filter brand, and the FRAM team continues to manufacture and market a variety of quality oil, air and fuel filters, as well as many automotive accessories such as PCV valves, crankcase filters and transmission modulators. *Road dust and pollen particles ranging in size from 5-100 microns.

64mm with 14 flats Fits New 3.5L and 5.7L Toyota V8 Engines Use in conjunction with a 24mm or 15/16" socket Made in U.S.A. Toyota Models: Avalon (2005-2011) Camry 4 cyl (1983-2010), V6 (2007-2011) Celica (1986-2005) Corolla (1983-2011) Echo (2000-2005) Highlander 4 cyl (2001-2011) V6 (2008-2011) Matrix (2003-2011) MR2 (1985-2005) Paseo (1992-1997) Prius (2001-2011) RAV4 (1996-2011) Sequoia (2009-2011) Sienna (2007-2011) Solara (1999-2001) Tercel (1980-1998) Tundra (2007-2011) Venza (2009-2011) Yaris (2006-2011) Scion Models: tC (2005-2011) xA (2004-2006) xB (2004-2011) xD (2008-2011) Lexus Models: ES 350 (2007-2011) GS 300 (2006-2011) GS 350 (2007-2011) GS 450h (2007-2011) IS 250 (2006-2011) IS 350 (2006-2011) LS 460 (2007-2011) LS 600h L (2008) RX 350 (2007-2011)

Brand New factory sealed Briggs and Stratton OEM FILTER-A/C CARTRIDGE. Current 2011 Briggs and Stratton part, Subject to availability from Briggs and Stratton. If not in stock you will be notified within 1 business day.. Check your Owners/Parts manual for correct application and fit. This is the current part description provided by the Original Equipment Manufacturer (OEM). To confirm your parts fit or description, Email us with your Make, Model and Serial Numbers.

You'll be ready to garden all year round with the Mantis 7225-00-02 Two-Cycle Gas-Powered Tiller/Cultivator. With a powerful engine, durable tines, and compact profile, the Mantis Tiller/Cultivator is ideal for creating new gardens, tilling in narrow rows and raised beds, or along fences. Whether you're a first-time gardener breaking through new ground or a veteran green thumb, the Mantis Tiller/Cultivator will help you maintain a bountiful garden for years to come.At nine inches wide, this tool is perfect for tilling in narrow rows. View larger.Master and amateur gardeners alike find it handy for both new and established gardens. View larger.Powerful but Easy to ControlDon't be fooled by the small, compact design of the Mantis Tiller/Cultivator. Though it weighs a mere 20 pounds and has a width of only nine inches, the Mantis is powerful, thanks to its two-cycle, commercial-grade gas engine.A reliable push-button primer will get you started, but the tines won't move until you squeeze the throttle. Once you've activated the throttle, the patented serpentine tines spin at up to 240 RPM to break through sod--even hard clay--tilling down to a depth of 10 inches.The Mantis Tiller/Cultivator makes it easy to maintain your garden. Simply reverse the tines to shallow-cultivate depths of up to three inches--it's much faster than using hand tools. And because it tills a nine-inch-wide path, this tool is especially useful in tight spaces and hard-to-reach areas. That's a real advantage for raised-bed gardeners.Convenient, Versatile, and DurableThe Mantis Tiller/Cultivator features folding handle bars which make it convenient to store in a garage or tool shed.And with optional attachments (sold separately), the Mantis Tiller/Cultivator can be used beyond the confines of your garden. Its lightweight design and convenient carrying handle make it portable, so adding an accessory such as a border edger or hedge trimmer could potentially keep you busy all summer and into the fall.The tiller/cultivator's durable one-piece cast gear box is designed to last. Additionally, the tines are guaranteed against breakage for the lifetime of the tool.What's in the BoxGas-powered tiller/cultivator with serpentine tines.Patented serpentine tines spin at up to 240 RPM to break through sod and even hard clay, tilling down to a depth of 10 inches. View larger.

Mantis Gas Powered Tiller/Cultivator Powerful Commercial Grade 2 Cycle Engine Easy Push Button Priming Convenient On/Off Switch Ergonomic Speed Control Durable 1 Piece Cast Gear Box Lightweight Fold Down Handle Bars For Easy Storage Handy Carrying Handle Entire Unit Weighs Only 20 LB 10" Tine Depth Patented Serpentine Tines Are Guaranteed For Unit Lifetime Against Breakage 2 Year Limited Warranty

Brand New factory sealed Briggs and Stratton OEM PLUG-SPARK. Check your Owners/Parts manual for correct application and fit. This is the current part description provided by the Original Equipment Manufacturer (OEM). To confirm your parts fit or description, Email us with your Make, Model and Serial Numbers.